ADDINOL Gear Oil CKT 100 is a demulsifying fully synthetic gear oil based on PAO and zinc-free additives. It is used in enclosed gear drives with splash or circulation lubrication as well as for bearings, joints, pressure spindles, spur gears and worm gears.

This viscosity grade is suitable for systems requiring a balanced transition between flowability and load capacity of the lubricating film. Good separation of water and air, low foaming tendency and ageing resistance contribute to longer oil change intervals in gear and circulation systems.

Applications

• Enclosed gear drives with splash or circulation lubrication
• Spur gears and worm gears
• Heavily loaded bearings, joints and pressure spindles
• Circulation lubrication systems requiring extended oil use
• Industrial assemblies with wider temperature fluctuations
• Hydraulic assemblies where the manufacturer specifies oil meeting HVLP requirements
• Gear and lubrication systems with moderate to higher loads

Features

• ISO VG 100 viscosity grade
• Fully synthetic PAO base
• Zinc-free additives
• Good separation of water and air
• Low foaming tendency
• High viscosity index
• Resistance to surface micropitting
• Very good ageing resistance of the oil

Benefits

• Longer oil change intervals in gear and circulation systems
• Lower risk of foam formation in practical use
• Protection of gears, bearings, joints and guides against wear
• Lower maintenance and repair costs
• Long-term lubrication supply when the viscosity is selected correctly and the manufacturer instructions are followed

Meets requirements

• DIN 51517-3 (CLP)
• DIN 51517-4 (CLPX)
• ISO 12925-1 / ISO 6743-6 (CKC/CKD/CKE)
• DIN ISO 3448
• DIN 51524-3 (HVLP)
• ISO 11158 / EN ISO 6743-4 (HV)