ADDINOL Guideway Oil XG 220 is an oil for guideways and sliding surfaces based on mineral base oils and ash-free additives that reduce stick-slip. It is used for machine-tool guideways, guideways with plastic coating and machine assemblies requiring a higher load-carrying lubricating film.

The higher viscosity grade is intended mainly for vertical guideways with high loads, for example in vertical boring and turning machines, portal milling machines and spindles of lifting and conveying equipment. The oil protects contact surfaces against wear and corrosion and can also be used as CLP 220 gear oil where specified by the manufacturer.

Applications

• Vertical guideways and sliding surfaces with high loads
• Vertical boring and turning machines
• Portal milling machines
• Spindles of lifting and conveying equipment
• Guideways with plastic coating
• Gear assemblies where the manufacturer specifies CLP 220 oil

Features and Benefits

• Viscosity grade ISO VG 220
• Mineral base oils with special ash-free additives
• Reduction of stick-slip during start-up and slow feed movement
• Increased load-carrying capacity of the lubricating film
• Good water separation from oil
• Resistance to oil ageing
• Protection of guideways and sliding surfaces against corrosion
• Load-bearing lubricating film for vertical guideways and high loads
• Less wear on guideways, sliding surfaces and machine elements
• Smoother feed movement during start-up and slow movement
• Easier separation from water-miscible metalworking fluids
• Use also as CLP 220 gear oil in suitable systems

Meets requirements

• ISO 6743/4: HG
• ISO 6743/13: GA and GB
• DIN 51502 (CGLP)
• DIN 51524-2 (HLP)
• DIN 51517-3 (CLP)
• ISO 3448

• H412: Štetno za vodeni okoliš s dugotrajnim učincima.