ADDINOL Guideway Oil XG 32 is an oil for guideways and sliding surfaces based on mineral base oils and special ash-free additives. It is used for the lubrication of horizontal and vertical guideways in machine tools, including guideways with plastic coating.

The lower viscosity grade is intended mainly for horizontal guideways with medium loads, such as guideways in milling, turning, drilling and grinding machines. The oil helps reduce stick-slip, separates water well from water-miscible metalworking fluids and protects guideways against wear and corrosion.

Applications

• Horizontal guideways and sliding surfaces in machine tools
• Milling, turning and drilling machines
• Cylindrical and surface grinding machines
• Long planing machines and similar machine equipment
• Guideways with plastic coating
• Hydraulic systems where the manufacturer specifies HLP oil

Features and Benefits

• Viscosity grade ISO VG 32
• Mineral base oils with special ash-free additives
• Reduction of stick-slip during start-up and slow feed movement
• Good water separation from oil
• Resistance to oil ageing
• Protection of guideways and sliding surfaces against corrosion
• Use also in hydraulic systems according to HLP requirements
• Smoother sliding of guideways during start-up and slow feed movements
• Less wear on guideways, sliding surfaces and machine elements
• Easier separation from water-miscible metalworking fluids
• Longer oil service life with proper system maintenance
• Lower risk of sticky residues forming on guideways

Meets requirements

• ISO 6743/4: HG
• ISO 6743/13: GA and GB
• DIN 51502 (CGLP)
• DIN 51524-2 (HLP)
• DIN 51517-3 (CLP)
• ISO 3448

• H412: Štetno za vodeni okoliš s dugotrajnim učincima.