ADDINOL Penta-Cool NM 7000 N is a non-water-miscible cutting oil based on mineral oil solvates with low PAH content. It contains additives based on organic sulphur and sulphur-phosphorus compounds, polar components, antioxidants and corrosion inhibitors.

Applications

• Cutting of difficult-to-machine ferrous materials
• High-alloy case-hardening steels
• Hardened and tempered steels
• Chrome-vanadium and stainless steels
• Gear machining, grinding and shaping
• Thread rolling, tapping and tool grinding

Features

• Non-water-miscible cutting oil for demanding machining
• Mineral oil solvates with low PAH content
• Sulphur and sulphur-phosphorus additives for loaded contacts
• Polar components for lubrication of the cutting zone
• Antioxidants and corrosion inhibitors
• Use without dilution

Benefits

• Reliable oil film for machining high-alloy and stainless steels
• Protection of tool and workpiece under higher contact loads
• Use across various demanding machining processes
• Longer usable oil life with suitable condition monitoring
• Protection of workpieces against corrosion during the process

Note

Due to active sulphur compounds, the oil is not intended for non-ferrous metals.

• H315: Nadražuje kožu.
• H319: Uzrokuje jako nadraživanje oka.
• P264: Nakon uporabe temeljito oprati ...
• P280: Nositi zaštitne rukavice/zaštitno odijelo/zaštitu za oči/zaštitu za lice.
• P305+P351+P338: U SLUČAJU DODIRA S OČIMA: oprezno ispirati vodom nekoliko minuta. Ukloniti kontaktne leće ako ih nosite i ako se one lako uklanjaju. Nastaviti ispirati.
• P332+P313: U slučaju nadražaja kože: zatražiti savjet/pomoć liječnika.
• P337+P313: Ako nadražaj oka ne prestaje: zatražiti savjet/pomoć liječnika.