ADDINOL Poly Gear PG 460 is a fully synthetic industrial gear oil based on polyalkylene glycol and additives for protection against wear, ageing, corrosion and foaming. It is used mainly in worm gears, heavily loaded gear drives as well as sliding and rolling bearings.

This grade is designed for slower assemblies where a very load-bearing lubricating film and reliable lubrication at elevated temperatures are required. During changeover it must be noted that the oil is not miscible with mineral, vegetable, PAO or ester-based oils.

Applications

• Enclosed industrial gear drives with splash or circulation lubrication
• Worm gears
• Sliding and rolling bearings
• Calenders and similar industrial equipment
• Slower gear drives and worm gears

Features

• ISO VG 460 viscosity grade
• Fully synthetic polyalkylene glycol (PG) base
• Water-insoluble oil base
• High lubricating film thickness
• Wear protection in gear drives and bearings
• Ageing resistance of the oil
• Corrosion protection of metal surfaces
• Low foaming tendency
• Not miscible with oils based on mineral, vegetable, PAO or ester base oils
• Neutral towards HNBR and EPDM seals

Benefits

• Lower oil temperature in worm gears compared with mineral oils
• Longer oil service life
• Protection of gears, bearings and guides against wear
• Lower maintenance and repair costs
• Reliable lubricating film at elevated temperatures
• Long-term lubrication supply when the viscosity is selected correctly and the manufacturer instructions are followed

Meets requirements

• DIN 51517-3 (CLP)
• ISO 12925-1 / ISO 6743-6 (CSPG / CTPG)
• ISO 3448

Approvals

• C.H. Schaefer Getriebe GmbH
• KHS Maschinen und Anlagen
• Lingl Anlagen- und Verfahrenstechnik
• Pekrun: factory standard 8053

• H304: Može biti smrtonosno ako se proguta i uđe u dišni sustav.
• H317: Može izazvati alergijsku reakciju na koži.
• H412: Štetno za vodeni okoliš s dugotrajnim učincima.