ADDINOL Flushing Oil Super is a flushing oil for internal cleaning of internal combustion engines. It is used immediately before an engine oil change and helps remove residual used oil, sludge and deposits from the lubrication system. A dedicated combination of cleaning additives improves the flowability of the used oil, allowing more effective draining from the engine.

Features and Benefits

• Effective dissolution of deposits and oxidation residues
• Cleaning of oil passages, valves and filters without mechanical intervention
• Compatible with mineral and synthetic engine oils
• Prepares the system for fresh oil by reducing residual contamination
• Active flushing action with strong cleaning performance
• Dissolves sludge and deposits within the lubrication system
• Contributes to smoother operation after cleaning

Applications

• Flushing of internal combustion engines prior to an oil change
• Cleaning of hydraulic systems before switching to a new hydraulic oil
• Flushing of circulating and industrial lubrication systems during maintenance
• Suitable for petrol and diesel engines, with or without turbocharging

Instructions for use
Pour the contents of one can (0.5 l) into the warm engine oil before the oil change
Let the engine run for approximately 10 minutes at idle speed, varying the engine speed
Switch off the engine, immediately drain the used oil with improved flow properties, and replace the oil

• H304: May be fatal if swallowed and enters airways.
• H317: May cause an allergic skin reaction.
• P261: Avoid breathing dust/fume/gas/mist/vapours/ spray.
• P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
• P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
• P302+P352: IF ON SKIN: Wash with plenty of water/…
• P331: Do NOT induce vomiting.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P405: Store locked up.
• P501: Dispose of contents/container to …